This is a performance model about Heat Transfer Oil (HTO) effect through the coil in the PCM storage medium. The user will set the inlet hot temperature (hot side) as a known value. Therminol-VP1 will be used as HTO. Users can change the PCM material by assigning the density, thermal conductivity, etc...The user can change the material and the fluid correlations. Therminol-VP1 data is stored in an excel sheet. The model will calculate the following:
1-Energy balances.
2-Thermal effectiveness.
3-Losses to the ambient.
4-Temperature outlet (hot side).
5-Storage temperature.6-Temperature profile along the heating coil.
**MatLab-SimuLink should be used to run the model.
Copyright © 2007 by Mohamed A. Sharaf Eldean Ayoub
All rights reserved.
No part of this work may be reproduced, distributed, or transmitted in any form or by any means, including photocopying, recording, or other electronic or mechanical methods, without the prior written permission of the publisher (Mohamed A. Sharaf Eldean Ayoub).
For permission requests, write to the publisher, addressed “Attention: Permissions Coordinator,” at the address below.
REDS Software Library
https://www.redslibrary.com
Kuala Lumpur Malaysia
mohamedsheraf@redslibrary.com
00601139795943
All Rights Reserved
___________________
Heat Exchanger (HTO/Therminol-VP1) with PCM Storage: Performance Model
You can get your discount code from the services page, or ask for it via chatting with Prof Dr. Mohamed A Sharaf Eldean.