This system is about coupling different power systems with a reverse osmosis desalination plant. The hybrid system contains the following:
1-Horizontal wind turbine.
2-Vertical wind Turbine.
3-Photovoltaic with batteries.
4-Fuell Cell attached to the PV for gas compression.
5-Main grid power.
6-Reverse osmosis as an application with an energy recovery device.
User should specify the productivity and some operating conditions for RO-energy recovery unit.
Also it is very important to assign the kW power per set (wind turbine) in order to evaluate the number of wind turbine needed. User can select between different systems combined with RO. The RO types are:
1. RO-Basic
2. RO-PWT
3. RO-PEX**Watch the video:
**MatLab-SimuLink (64bit) should be used to run the model.
Copyright © 2007 by Mohamed A. Sharaf Eldean Ayoub
All rights reserved. No part of this work may be reproduced, distributed, or transmitted in any form or by any means, including photocopying, recording, or other electronic or mechanical methods, without the prior written permission of the publisher (Mohamed A. Sharaf Eldean Ayoub). For permission requests, write to the publisher, addressed “Attention: Permissions Coordinator,” at the address below.
REDS Software Library
https://www.redslibrary.com
Kuala Lumpur Malaysia
mohamedsheraf@redslibrary.com
00601139795943
All Rights Reserved
___________________
+for+Reverse+Osmosis+Desalination+Process){kind=link}