Solar Adsorption Water Cooling for Air Conditioning system is presented in this model with the assistance of Evacuated Tube Collector (ETC). SilicaGel material has been used in this model. Silica gel is an amorphous and porous form of silicon dioxide (silica), consisting of an irregular tridimensional framework of alternating silicon and oxygen atoms with nanometer-scale voids and pores. Water has been used as the main refrigerant throughout the cycle. The cycle contains the following:
1-Evaporator (water).
2-Bed reactor tank (SilicaGel/water).
3-Condenser (water vapor).
5-Expansion valve.
6-Solar ETC (Water).
7-Cost calculations for each unit.
In this Evacuated tube Solar Collector (ETC) design model, the user will be able to discover the total area based on the assigned thermal load volume. The following parameters can be calculated:
1-Mean plate temperature.
2-ETC total area.
3-Overall losses.
4-Efficiency.
5-Exergy analysis.
 
**MatLab-SimuLink should be used to run the model.
 
Copyright © 2007 by Mohamed A. Sharaf Eldean Ayoub
All rights reserved. 
No part of this work may be reproduced, distributed, or transmitted in any form or by any means, including photocopying, recording, or other electronic or mechanical methods, without the prior written permission of the publisher (Mohamed A. Sharaf Eldean Ayoub). For permission requests, write to the publisher, addressed “Attention: Permissions Coordinator,” at the address below.
 
REDS Software Library
https://www.redslibrary.com
Kuala Lumpur Malaysia
mohamedsheraf@redslibrary.com
00601139795943
All Rights Reserved
___________________